POLYMERFLAME | Materials

In collaboration with our partners, we have developed a set of ТМ POLYMERFLAME materials that allow easy and conventional creation of various thermoplastic coverings: for pools, industrial floors, and metal.

Thermoplastic polymer powder material AquaMix

Fine thermoplastic powder, specially designed to create decorative and protective coatings for swimming pools, ponds, and other bodies of water.

AquaMix colors

Primer Aqua Barrier

Specially developed two-component material based on modified epoxy resin, designed for priming surfaces with subsequent application of thermoplastic powder AquaMix utilizing the flame-spray method.

Membrane primer Aqua Gum

Specially developed two-component material based on modified highly filled epoxy resin and polyurethane, designed for surface preparation followed by flame-spray application of AquaMix thermoplastic polymer powder.

Membrane primer Aqua Flexible

Specially developed two-component material based on modified epoxy resin and polyurethane, designed for surface preparation followed by flame-spray application of AquaMix thermoplastic polymer powder.

Repair mixAqua Repairs

Specially developed composition based on modified epoxy resin and synthetic active highly dispersed mineral fillers, designed for repair and restoration of hydrolysis damaged areas of fiberglass pools.

Repair mix Aqua Concrete

Specially developed composition based on modified epoxy resin and synthetic active highly dispersed mineral fillers, designed to repair defects and prepare the surface of concrete pools for further flame-spray application of AquaMix thermoplastic polymer powder.

EPU-sealant Aqua Flexible Plus

Specially developed saturated two-component EPU-sealant, based on of modified epoxy resin and polyurethane, intended for sealing embedded elements of the pool (skimmers, nozzles, drains, floodlights, countercurrents, etc.) and filling of expansion joints. Comfortable material when working on vertical surfaces. It is used after preliminary preparation surfaces with Aqua Flexible membrane primer.

Polymer matrixAqua Composite

Two-component polymer matrix based on modified epoxy resin intended for work with fiberglass fillers (mats, fabrics, veils and etc.). It is used in the repair of composite bowls and glass fiber reinforcement concrete tanks.

Underwater adhesive sealantAqua Pin

Unique two-component underwater glue sealant, based on modified epoxy resins that polymerize even under water! It is used for sealing and repairing defects in conditions where it is impossible drain the water from the tank and ensure dry access to the repair area.

Colouring paste

Specially developed composition based on modified epoxy resin and coloring fillers, designed to ensure the impeccable quality of POLYMERFLAME technological processes.

Heat-resistant tapeТhermal Tape

An adhesive fiberglass fabric with Teflon coating (PTFE), designed as a protective agent against the adhesion of thermoplastic polymers in the technological processes of POLYMERFLAME.

Thermoplastic polymer powder material PRO-M

Fine thermoplastic powder, specially designed to create decorative and protective coatings for metal surfaces.

PRO-M RAL colors

PrimerPRO-M Primer MP

A special two-component composition based on modified epoxy resin is intended for anti-corrosion treatment of metal. This material is waterproof and has high adhesion to metal. It also performs an energy-saving function when applying a finishing thermoplastic coating on thick metal.

Thermoplastic polymer powder material PRO-F

Fine thermoplastic powder, specially designed to create decorative, protective, and chemically resistant coatings for industrial floors.

PRO-F colors

PrimerPRO-F Primer

A low-viscosity two-component composition of deep penetration based on modified epoxy resins, intended for priming and strengthening of mineral bases. The material penetrates deeply into the base and has high adhesion to various mineral bases.

Starter puttyPRO-F Start

Rough two-component composition based on modified epoxy resin for repair works. It has a wide range of applications and is intended for the correction of deep defects of the mineral base.

Finish puttyPRO-F Finish

Thin two-component composition based on modified epoxy resin for final preparation of the base before applying the finish thermoplastic coating. It is intended for the correction of shallow defects (up to 5 mm) and pore filling.

Color compositionPRO-F Observer

Two-component color composition based on modified epoxy resin. It is used to detect defects in surface preparation, as well as to organize the contact layer when applying a finishing thermoplastic coating.