Primer Aqua Barrier
Specially developed two-component material based on modified epoxy resin, designed for priming surfaces with subsequent application of thermoplastic powder AquaMix utilizing the flame-spray method.
Membrane primer Aqua Gum
Specially developed two-component material based on modified highly filled epoxy resin, designed for surface preparation followed by flame-spray application of AquaMix thermoplastic polymer powder.
Membrane primer Aqua Flexible
Specially developed two-component material based on modified epoxy resin and polyurethane, designed for priming and sealing embedded elements of the pool (skimmers, nozzles, drains, floodlights, countercurrents, etc.) and filling of expansion joints.
Repair mixAqua Repair
Specially developed composition based on modified epoxy resin and synthetic active highly dispersed mineral fillers, designed for repair and restoration of hydrolysis damaged areas of fiberglass pools.
Colouring paste
Specially developed composition based on modified epoxy resin and coloring fillers, designed to ensure the impeccable quality of POLYMERFLAME technological processes.
Repair mix Aqua Concrete
Specially developed composition based on modified epoxy resin and synthetic active highly dispersed mineral fillers, designed to repair defects and prepare the surface of concrete pools for further flame-spray application of AquaMix thermoplastic polymer powder.
EPU-sealant Aqua Flexible Plus
Specially developed saturated two-component EPU-sealant, based on of modified epoxy resin and polyurethane, intended for sealing embedded elements of the pool (skimmers, nozzles, drains, floodlights, countercurrents, etc.) and filling of expansion joints. Comfortable material when working on vertical surfaces. It is used after preliminary preparation surfaces with Aqua Flexible membrane primer.
Polymer matrixAqua Composite
Two-component polymer matrix based on modified epoxy resin intended for work with fiberglass fillers (mats, fabrics, veils and etc.). It is used in the repair of composite bowls and glass fiber reinforcement concrete tanks.
Underwater adhesive sealantAqua Pin
Unique two-component underwater glue sealant, based on modified epoxy resins that polymerize even under water! It is used for sealing and repairing defects in conditions where it is impossible drain the water from the tank and ensure dry access to the repair area.
Colouring paste
Specially developed composition based on modified epoxy resin and coloring fillers, designed to ensure the impeccable quality of POLYMERFLAME technological processes.
Heat-resistant tapeТhermal Tape
An adhesive fiberglass fabric with Teflon coating (PTFE), designed as a protective agent against the adhesion of thermoplastic polymers in the technological processes of POLYMERFLAME.
Thermoplastic polymer powder material AquaMix
Fine thermoplastic powder, specially designed to create decorative and protective coatings for swimming pools, ponds, and other bodies of water.